Learn more about our products and services.
CrystalSix and Crystal 12 Troubleshooting and Maintenance
About the webinar
CrystalSix and Crystal 12 are rotary Quartz Crystal Monitors utilized in OLED, Solar and Semiconductor applications, to name a few. QCMs like these also sometimes require user troubleshooting and maintenance to ensure good connectivity as well as crystal positioning within the aperture. During this webinar you will learn about the CrystalSix and Crystal12 and best practices to troubleshoot and maintain them.
short article from INFICON about how to reliably measure permeability of films and membranes using instruments from INFICON
New sniffer lines for use in ATEX zone 2, a new handprobe for the HLD6000 with improved cross-sensitivity and the XL3000FlexRC for use with remote control
Helium prices have gone up again lately in several parts of the world. Hydrogen can be a suitable alternative for many leak testing applications when used appropriately. Read our five tips on what to consider when switching from helium to hydrogen leak testing.
Time is money- this also applies to leak testing. INFICON has now introduced a new software for theLDS3000 which speeds up your testing cycles and reduces the cost of the leak testing system design– without sacrificing the reliability of your testing.
The battery market is striving for lower cost of production, higher yield and improved quality. To produce high quality batteries that are safe as well as long lasting at high yields, strict quality control throughout the production process is mandatory. INFICON offers a wide product portfolio for a variety of production applications.
Are you using water bath to leak test your products, but are not sure of which leak sizes you are finding? The Bubbleizer from INFICON helps you calculate flow into bubbles and vice versa.
The testing industry is making more and more use of BUS technology in integrated systems. As a result of customer demand, INFICON has now added ProfiBus, ProfiNet, DeviceNet and EtherNetIP capabilities to the Ecotec E3000 product line.
Chances and limitations
Industrial application, temperature compensated
Harsh process application, temperature compensated
EtherCAT, temperature compensated
Current loop, temperature compensated
Superior signal stability, temperature controlled
Superior signal stability, temperature controlled
High temperature application, temperature controlled
High temperature application, temperature controlled
Small footprint, temperature controlled
Small footprint, temperature controlled
High speed, temperature controlled
High speed, temperature controlled
The reference, true high precision
Absolute Switch - Accurate and reliable pressure detection
Differential Switch - Accurate and reliable pressure detection
Differential to Ambient - Safety switch for vacuum systems
Absolute pressure switch with a adjustable electrical switching contact
Miniature sensor for OEM
Miniature sensor for OEM, dual sensor
With the ELT3000 PLUS Battery Electrolyte Leak Detector, INFICON offers a unique, non-destructive leak testing solution for all Lithium-ion battery cells, including fragile pouch cells.
Specifically designed for full-time sniffing applications in demanding production Environments.
HIGH FLOW technology for highest measurement certainty and fastest throughput.
Modern leak detector for industrial use
The portable Extrima Leak Detector is the ultimate intrinsically safe instrument for leak detection in the toughest environments, including hazardous locations such as Zone 0.
Fast, reliable and robust instrument for utilities leak detection such as telecom cables and water pipes
New levels of productivity and reliability to the final leak testing of refrigerators, freezers, automotive air conditoners and similar products.
User-friendly handling, reproducibility of measuring results and integration into local networks
The ultimate in mobile vacuum leak detection designed to meet the most critical and demanding leak detection applications and in particular large volumes
Designed for the needs of leak checking in semiconductor applications
Delivers accurate, lab-quality results in minutes to make threat assessments, and decisions with confidence
renowned standard when it comes to economic helium vacuum leak testing in industrial or semiconductor environments
the only person-portable GC/MS that identifies VOCs and SVOCs. Quick, Easy, Accurate On-Site Performance
Providing fast, accurate and repeatable test results, testing flexibility, and high sensitivity in a low maintenance design
Modular leak detector, compact Performance at the Highest Level
Reliable, intelligent and repeatable platform, Optimize your production
T-Guard2 Leak Detection Sensor closes the gap between costly hard vacuum helium leak detection and low sensitivity leak testing methods like waterbath and pressure decay.
Simplify and Accelerate Gas Analysis
Web-based user interface that provides several novel benefits over traditional software.
Cost efficient forming gas or helium for accumulation leak testing, very sensitive and can detect leaks down to the 10-5 mbar∙l/s range
This accessory to Sensistor Sentrac Hydrogen Leak Detector allows you to do automatic leak testing with hydrogen tracer gas
High pressure samples, especially those containing contaminants, such as condensing aerosols, can be harmful to Micro GC Fusion. The External Sample Conditioner, or ESC, provides both a pressure reducing feature while maintaining the sample temperature at >50°C (122°F).
GC-based system that autonomously samples VOCs in water, quantifies contaminant levels and automatically alerts users if thresholds are exceeded
Innovation makes the difference
100% Tested for Accuracy and Reliability and needed to monitor deposition rate in situ, collect accurate measurement data, optimize PVD applications, and to automate the process when coupled with a thin film controller.
Quartz crystals are needed to monitor deposition rate in situ, collect accurate measurement data, and provide a means to analyze research applications.
Non-Invasive, Clamp-On RF Detector Delivers High-Speed Arc Detection and Clean End Point Control for higher yields and reduced Cost of Ownership
Non- Invasive, high speed, DC arc dection for real-time process control
High speed chamber leak test - gas analysis
ATM To Medium Vacuum Gauge - High volume standard applications
Most advanced digital Pirani technology, compact size and the variety of features.
Sustainable and reliable solution for seal inspection in Capsules, MAP- and other types of packaging.
Tracer gas filler with complete tooling and gas filling functions
Convection enhanced Pirani technology, compact design, higher accuracy
Tracer Gas Filler is a stand-alone instrument which allows for easy and reliable tracer gas filling and evacuating
Accessory to the Extrima, Ex-certified Hydrogen Leak detector, for injecting tracer gas into fuel leaks during maintenance of aircrafts
Enable to test and to calibrate the helium sniffer leak detector Protec P3000(XL) and XL3000flex for the highest quality demands in leak detection
Calibrated test leaks enable to test and to calibrate refrigerant sniffer leak detectors for the highest quality demands in leak detection
Calibration test leaks with gas reservoir for vacuum applications
Calibrated leaks which are capable of meeting the requirements concerning type and required leak rate
Calibrated test leaks enable to test and to calibrate refrigerant sniffer leak detectors for the highest quality demands in leak detection
Cover a wide range of leak rates to suit your specific application and include bigger leaks (Types A-C) and smaller leaks (Types E and G). Leak Type A is intended for accumulation testing only
Convection enhanced Pirani technology, higher accuracy, OLED display, RS485/RS232
- 2 kV
- 3 kV
- 5 kV
- 10 kV
- DN 16 ISO-KF
- DN 25 ISO-KF
- DN 40 ISO-KF
- DN 50 ISO-KF
- DN 16 CF-F
- DN 40 CF-F
- DN 40 CF-F
- DN 63 CF-F
- DN 100 CF-F
- DN 160 CF-F
- DN 63 ISO-F
- DN 100 ISO-F
- DN 160 ISO-F
CAF 4
- Apezon M
- Dow Corning
- FU 090
- FM 090
- OL 090
- DYNAFAT
Provides exceptional value by combining the best performance, quality, and features of any other quartz crystal controller
Provides exceptional value by combining the proven performance of INFICON thin film controllers with unique features, all designed for you to achieve the most from your OLED process
Advanced, Affordable Rate Control for Single and Multiple Layer Processes
Highly Accurate Sequential or Codeposition Control
Low-Cost Deposition Control on a PCI Express Card
Simultaneous Control of Up to Eight Materials using Electron Impact Emission Spectroscopy
Compact deposition monitor built with ModeLock technology to maximize reproducibility and uniformity with the highest thickness accuracy, best measurement resolution, and lowest rate noise
Compact deposition monitor built with ModeLock technology to maximize reproducibility and uniformity with the highest thickness accuracy, best measurement resolution, and lowest rate noise
Multi-Film Rate / Thickness Monitor with averaged sensor control capability for large systems or assigned sensor inputs for different materials
Combines the simplicity of USB connectivity with the accuracy of a precision measurement engine, all in a compact, inexpensive package
cost effective solution to high-accuracy thickness monitoring for short optical and batch coating processes
Proven reliability and durability and the best thermal stability of any sensor head on the market.
proven reliability and durability
allow crystal installation into the sensor from the side, convenient for systems with insufficient room for front load crystal installation
designed for use in critical processes where it is desirable to have a second crystal in the vacuum chamber
simple and inexpensive solution for QCM applications where one crystal may not be enough
offer proven reliability and durability and have the best thermal stability of any sensor head on the market
repeatability, precision, and durability of quartz crystal microbalance (QCM) measurement to atomic layer deposition (ALD)
designed for use in any sputtering process
CrystalSix Sensor is critical for long processes demanding continuous rate control
designed for demanding processes, employing very thick films and several different materials
SemiQCM™ SR sensor is one component of a system for precursor monitoring with the other components being an IMM-200 and FabGuard (version 19.12.00-a or higher).
Real-Time, in situ process monitoring, prevent over-etching, identify chamber clean end point
Three channel controller for passive gauges
Bayard-Alpert passive gauge heads for VGC083
Things you need to know!
Single channel controller for PGE050
Sustainable solution for process measurement, control and data log.
Cost effective pressure monitoring solution.
Connect to INFICON CDG product line to provide a 4 Digit Display
High performance quadrupole mass spectrometer
Why you cannot find relevant leaks
Flammable refrigerants in manufacturing
The essentials of tracer gas handling
How to increase efficiency
Integration and data exchange with a higher-level control system via interfaces
How does this relate to your leak testing requirements
Avoiding costly recalls
Reliable sensors for safe driving
An evolving market and leak testing standards
Multi-Purpose Quadrupole Mass Spectrometer
Basic knowledge explained easy and practice-oriented
How to determine and ensure the permissible leak tightness of your product
Intelligent solution for real-time vacuum gas monitoring
How to measure your factory performance
How to measure your factory performance
How to measure your factory performance
Pressure Control and Monitoring in SEMI ALD Processes
with Augent® OPG550
Convection enhanced Pirani technology, with DeviceNet, higher accuracy
The Pirani Gauge Enhanced 050 (PGE050) is the passive version of our active convection enhanced Pirani gauges PGE300 and PGE500.
Pirani Capacitance Diaphragm Gauge combines Pirani sensor and ceramic capacitance diaphragm sensor in one product
Based on advanced MEMS (Microelctromechanical Systems) sensor technology, Gas type independent above 2 mbar, High accuracy and reproducibility at atmosphere
Based on advanced MEMS (Microelctromechanical Systems) sensor technology, atmospheric ambient pressure measurement, Gas type independent above 2 mbar
Single Bayard Alpert sensor, measurement range from 5×10-10 mbar to 2.7×10-2 mbar, Excellent repeatability
Extreme PVD Process Monitoring Quadrupole Mass Spectrometer
Single Hot Ion gauge, OLED Display, RS485
Versatile process monitoring from baseline to process pressure
Bayard-Alpert Pirani Combination Gauge, single hot ion filament
Process monitoring at target pressure range
Allows the Transpector CPM to become a mobile troubleshooting instrument
Functions as two gauges in a single compact unit measuring from 5×10-10 mbar to atmosphere.
QMG 700 Analytical Mass Spectrometer to break through detection barriers and propel your process to the next level of innovation
Bayard-Alpert Pirani Capacitance Diaphragm Gauge (TripleGauge®), BCG450, combines the advantages of three different technologies in a single, compact, economical package to measure process and base pressure from 5×10-10 to 1500 mbar (3.75×10-10 to 1125 Torr)
Provide real-time leak detection and endpoint detection for critical process environments
High Pressure Hot Ionization Pirani Gauge, HPG400, combines High Pressure Hot Ionization and Pirani sensors in a single, compact, economical package to measure pressure from 2×10-6 mbar to atmosphere (1.5×10-6 Torr to atmosphere)
Inverted Magnetron Vacuum Gauge is the workhorse for all vacuum measurement applications. Measurement range from 1x10-9 mbar to atmosphere.
Inverted Magnetron Vacuum Gauge is for all ultra high vacuum applications, measurement range from 5x10-11 mbar
Inverted Magnetron Pirani Gauges, measure from 5 x 10-9 mbar to atmosphere
Cold cathode passive gauge heads for VGC094 and VGC083C
- DN 63 ISO-K/DN 63 CF
- DN 100 ISO-K/DN 100 CF
- DN 160 ISO-K/DN 160 CF
- DN 100 ISO-F
- DN 160 ISO-F
- DN 200 ISO-F
- DN 250 ISO-F
- DN 16 ISO-KF/16 CF-F
- DN 25 ISO-KF/16 CF-F
- DN 16 ISO-KF/40 CF-F
- DN 25 ISO-KF/40 CF-F
- DN 40 ISO-KF/40 CF-F
- DN 40 ISO-KF/63 CF-F
- DN 40 ISO-KF/100 CF-F
support functions for all HAPSITE Chemical Identification System models
On-Site, Decision Quality Data on VOCs in Water
trace Level Quantitative VOC Analysis
identify an Expanded Range of Chemicals in Hard to Reach or Dangerous Environments
Performs Soil and Water Analysis On-Site, Decision-Quality Data On VOCs In Water, Wastewater, Soils And Solid Wastes
The Factory Dashboard is the principal operations reporting tool used by industry-leading fabs around the world.
Replaces its crystals automatically without interrupting your process, when partnered with the INFICON IC6 Thin Film Deposition Controller
Remote Control for UL1000, UL1000 Fab, UL3000 Fab/ULTRA, UL5000, UL6000 Fab/PLUS, MODUL1000
Superior sensitivity and interchangeable sensors for maximum versatility.
Cloud hunting PPM display, superior sensitivity, and interchangeable sensors for maximum versatility.
Large, easy-to-read LCD display can not only pinpoint the leak location, but help quantify the leak size using the PPM reading.
Heated diode sensor for fewer false alarms with rechargeable convenience.
Easy operation and heated diode sensor for fewer false alarms.
Infrared sensor for fewer false alarms and superior sensitivity.
Simple operation and proven heated diode sensor for reliable leak checking.
Safe and easy leak checking using hydrogen forming gas.
Compact reference leak source that continuously leaks R134a, R1234yf, or R600a refrigerant for over 2 years
Simple, reliable and safe solutions for standalone constant monitoring of larger areas for most refrigerant gases.
Simple, reliable and safe solutions for standalone constant monitoring of any refrigerant gas.
Reliable measurement of refrigerant transfers in a durable, wireless package.
Industry-leading recovery rates even in the hottest conditions.
Simple operation, outstanding durability and great accuracy.
Superior accuracy, filter-protected sensor, and provide more jobsite productivity.
Two-stage rotary vane 5 CFM pump for ultimate vacuum down to 15 microns.
Versatility and flexibility for a variety of applications.
Safely detect flammable refrigerant and combustible gas leaks.
Convenient and simple operating for easy detection of carbon monoxide hazards.
The Factory Digital Twin is the most critical building block for developing a Smart factory. It collects all the real-time operations events to compute cycle time and throughput data to drive powerful applications.
Variety of Quartz Crystal Monitor (QCM) sensor feedthroughs to accommodate many QCM sensor and chamber configurations
Factory Scheduler utilizes Advanced Heuristics, Linear Programming, Optimization, and Intelligent Search Algorithms to generate a real-time optimized schedule that can be easily tuned to meet your manufacturing needs.
2.54 cm (1 in.) bolt or CF40 (2.75 in. ConFlat®) styles available, available with bored-through tube fittings
Provides straightforward instructions to operators and material handlers on the factory floor.
Leverage the historical operational data in the Digital Twin to create previously unavailable insight into Cycle Time losses.
Creates estimates of tool utilization for given starts profiles using precise factory data.
Optimally assign team members in the factory based upon current and future workloads.
Smart Fault Detection and Classification provides real time data integration and analysis to predict excursions before they happen.
Provides unparalleled capability to automatically translate collected data into meaningful information.
Provides integration of facilities and subfab components with process information.
A knowledge-based, decision support software platform specifically designed to help factories return tools to production quickly and correctly.
Supporting the Autonomous Driving Zero Defect Challenge - World’s First Smart Integrated Sampling Management System
- Universal Power Supply for BPG400, BPG402 and BCG450 Active Hot Ion Gauges
- 100 ... 240 V (ac) supply
- Y-cable with Dsub9 connector for accessing RS232 interfaces to PC/ PLC
Hydrogen has significant potential to help decarbonize our economy and to become the fuel of the future. INFICON has world-leading expertise to help make this vision a reality.
Continuously Short Delivery Times and Enhanced Features
Every second counts in the semiconductor industry and large-volume production lines. The new UL6000 Fab PLUS reduces downtimes and gives faster leak test results.
Watch these short videos and see how easily it finds leaks, how to calibrate and how to assemble the sensor in less than one minute!
Hot cathode ionization passive gauge heads for IM540
Improvements in cycle times and throughput for high-speed testing
I∙ZERO enables testing in spite of fluctuating helium background
The gauge head MAG084 is a unique magnetic field resistant inverted magnetron cold cathode gauge designed to operate with the Vacuum Gauge Controller VGC094.
Pirani passive gauge heads for VGC094
Mini hot ion Bayard-Alpert passive gauge head for VGC083
The new standard of ionization vacuum gauge.
Predict your factory shipments based on current and historical factory states, broken down by future weeks.
Enhanced Tool Performance (ETP) state logic combines traditional E10 tool centric data with WIP States to provide a comprehensive view of fab operational losses not visible with traditional reporting.
VGC094 is a prestigious solution for vacuum process measurement, control and data log.
Versatile hot cathode ionization passive gauge controller
The Ion Reference gauge Controller IRC081 and its user interface are an operating and display interface to the standardized Ion Reference Gauge IRG080.
«Ad hoc announcement pursuant to Art. 53 LR»
Easy with the new Sentrac Leak Detector
A German Engineer's Experience in Sweden
Global exchange is more important than ever.
«Ad hoc» announcement pursuant to Art. 53 LR
Success Story Bio Nahrungsmittel GmbH
The next generation of high-speed inline leak testing of battery cells
The tracer gas leak detection method helps finding smaller leaks much quicker, than the soap spray conventional method.
Celebrating the first anniversary of our new office in Mexico.
Provide real-time leak detection, endpoint detection and process monitoring for cutting-edge semiconductor manufacturing processes and other gas analysis applications
ATM to Ultra High Vacuum hot cathode gauge
Reliable leak detection in packaging production will reduce the risk of failures.
Interview with Fredrik Enquist
Versatile leak detection for your non-traditional applications
Overcoming Complex Challenges to Protect People and the Environment
Increased stability, better thickness accuracy and time saved
Advanced process expert for Single Pressure ALD/CVD and Etch.
Advanced process expert for Multi-Pressure ALD/CVD and Etch.
Japanese engineer enjoying new opportunities in Liechtenstein
«Ad hoc» announcement pursuant to Art. 53 LR
Detect HFCs, A2Ls, A3s and CO2 with the same tool
Opportunity to Experience Advanced Fabs and Traditional Chinese Culture While Working in Taiwan
Optimize your combustion efficiency
with Contura S-Series Seal Tester
The Ion Reference Gauge IRG080 sets a new standard within the vacuum ion gauges category.
R&D Scientist in Finland
Here's to our past, present, and future
Exhibition participation
How simple moves make a big impact
The Imperative of Accurate Leak Testing for Electric Vehicle Batteries and Fuel Cells
Leak testing is an essential part of quality control for many automotive components of traditional and electric cars, as well as battery cells.
A multitool for safety leak check on city gas distribution pipes systems.
Our new Gas Analyzer. Product introduction, availability, successful implementations of pre-production systems
With the new I-Guide3D 350 scanner
With Help from IRwin® Methane Leak Detector
ATM to Ultra High Vacuum DualGauge
Portable, easy-to-use refrigerant identification
Reliable, integrated refrigerant identification for RRR machines
ATM to Ultra High Vacuum TripleGauge®
Medium to Ultra High Vacuum SingleGauge
A challenge for manufacturers
Precision in Leak Detector Repairs
Excellence in Vacuum Gauge Service
The latest Precision Vacuum Measurement Solution.
«Ad hoc» announcement pursuant to Art. 53 LR
How Contura® S400 seal tester help to take the challenges of the food industry
How to enhance customers’ experience through Leak-Proof Packaging
Spend your time on more important things than manually documenting your survey work
How to automate your manual process easily
Foodpackaging, minimize risk of product recalls, ensure taste preservation, optimize shelf life of packaged products
INFICON Balzers wins the 2023 Swiss Manufacturing Award for Industry Excellence
Technical consideration of a test leak, test leak applications, Certifications
INFICON and CERN Explore Collaboration
INFICON Receives R&D 100 Award for the Ion Reference Gauge IRG080
Easy and efficient hydrogen sniffing leak testing
Interview with Kazuki Yanagita, Application Engineer at INFICON Japan
with the most selective instrument on the market
A common way to test hermetically sealed parts is helium bombing. Parts are stored in a high pressure helium atmosphere for a period of time and tested for escaping helium with a vacuum leak detector.
The consumption of helium influences the cost of operation and many users are looking for ways to save helium in vacuum leak testing.
Sodium-ion battery cells are a trending topic, as sodium-ion technology offers some advantages over the established lithium-ion approach.
Significantly reducing the number of bar holes with IRwin and its accessories
Interview with Takeshi Ishikawa, Sales Manager at INFICON Japan
A cross collaboration assignment brings personal and professional development
Accurate robotic leak detection on refrigerators with 3D scanner
Elevating Leak Detection through Intelligent Panel Mounting
Economical leak detection without the loss of expensive refrigerant.
For all jobs, big or small
INFICON receives recognition for Production Support and ESG Collaboration
In collaboration with ETH Zurich's Robotic Systems Lab, we are working on a project named ARAMMIS – Autonomous Robots for Area Mapping, Monitoring, and In-situ Sensing.
Overview on research projects with partners like NASA and ETH Zurich on future technology. We strive to advance innovation and push technological boundaries.
INFICON is a leading provider of innovative instrumentation, critical sensor technologies, and Smart Manufacturing/Industry 4.0 software solutions that enhance productivity and quality of tools, processes, and complete factories. These analysis, measurement and control products are essential for gas leak detection in air conditioning/refrigeration and automotive manufacturing. They are vital to equipment manufacturers and end-users in the complex fabrication of semiconductors and thin film coatings for optics, flat panel displays, solar cells and industrial vacuum coating applications. Other users of our vacuum-based processes include the life sciences, research, aerospace, packaging, heat treatment, laser cutting and many other industrial processes. We also leverage our expertise in vacuum technology to provide unique, toxic chemical analysis products for emergency response, security, and environmental health and safety.
As experts in gas sensing and vacuum measurements in many industries including semiconductor, energy and security, our teams are always looking for the “what’s next” in innovation.
A university degree course with integrated practical phases in a company - this is made possible by a cooperation with the University of Applied Sciences Grisons, Switzerland . This so-called dual study program focuses on practical training and the combination of study and work.
A new future proof Hot Ion Gauge generation from INFICON
Samantha’s journey at INFICON Syracuse
Big performance, small size
Advanced controller for process measurement and data recording.
INFICON is a leading provider of innovative instrumentation, critical sensor technologies, and Smart Manufacturing/Industry 4.0 software solutions that enhance productivity and quality of tools, processes, and complete factories. These analysis, measurement and control products are essential for gas leak detection in air conditioning/refrigeration and automotive manufacturing. They are vital to equipment manufacturers and end-users in the complex fabrication of semiconductors and thin film coatings for optics, flat panel displays, solar cells and industrial vacuum coating applications. Other users of our vacuum-based processes include the life sciences, research, aerospace, packaging, heat treatment, laser cutting and many other industrial processes. We also leverage our expertise in vacuum technology to provide unique, toxic chemical analysis products for emergency response, security, and environmental health and safety.
on Tuesday, March 5, 2024, at 09:00 a.m.
New Feature for Faster Cycle Times and Cost Savings
with Micro GC Fusion®
By Efficiently Identifying and Eliminating Methane Leaks
Expedition in the South Atlantic: On the trail of emissions from the seabed
How to safely search for leaks in aircraft fuel tanks
SMART-Spray, I·BOOST and SPRAY-Check
SL3000EX Sniffer Line now certified
IRwin Check-In App
The significance of proper leak testing techniques
«Ad hoc announcement pursuant to Art. 53 LR»
INFICON is a leading provider of innovative instrumentation, critical sensor technologies, and Smart Manufacturing/Industry 4.0 software solutions that enhance productivity and quality of tools, processes, and complete factories. These analysis, measurement and control products are essential for gas leak detection in air conditioning/refrigeration and automotive manufacturing. They are vital to equipment manufacturers and end-users in the complex fabrication of semiconductors and thin film coatings for optics, flat panel displays, solar cells and industrial vacuum coating applications. Other users of our vacuum-based processes include the life sciences, research, aerospace, packaging, heat treatment, laser cutting and many other industrial processes. We also leverage our expertise in vacuum technology to provide unique, toxic chemical analysis products for emergency response, security, and environmental health and safety.
On February 27, 2024, INFICON celebrated the opening of its new Global Application Center in Guangzhou, P.R. China, following an eight-month project timeline.
Building on the success of the ELT3000 PLUS we will introduce the ELT Vmax leak detector, a specialized device designed for integration into leak testing systems for industrial mass production of battery cells.
Formal release of the EcoBoost feature (formerly known as I·Zero 3.0)
Accurate leak detection plays a vital role in maintaining optimal conditions and to meet the challenges of the semiconductor industry.
Learn about INFICON's Capacitance Diaphragm Gauges for precise and reliable vacuum process monitoring, featuring easy integration.
INFICON is a leading provider of innovative instrumentation, critical sensor technologies, and Smart Manufacturing/Industry 4.0 software solutions that enhance productivity and quality of tools, processes, and complete factories. These analysis, measurement and control products are essential for gas leak detection in air conditioning/refrigeration and automotive manufacturing. They are vital to equipment manufacturers and end-users in the complex fabrication of semiconductors and thin film coatings for optics, flat panel displays, solar cells and industrial vacuum coating applications. Other users of our vacuum-based processes include the life sciences, research, aerospace, packaging, heat treatment, laser cutting and many other industrial processes. We also leverage our expertise in vacuum technology to provide unique, toxic chemical analysis products for emergency response, security, and environmental health and safety.
Inline leak testing for the mass production of battery cells
Cultivating Global Water Solutions Through Innovation and Action
A Basic Guide to Capacitive Vacuum Gauges
I-Guide3D 350 Scanner: Maximum Precision for Fully Automated Leak Test Systems
INFICON Smart solutions are pivotal in shaping the future of the semiconductor industry.
EX-certified Instruments for safe leak detection
Faster and more efficient LDAR is the solution to cut methane emissions
INFICON is a leading provider of innovative instrumentation, critical sensor technologies, and Smart Manufacturing/Industry 4.0 software solutions that enhance productivity and quality of tools, processes, and complete factories. These analysis, measurement and control products are essential for gas leak detection in air conditioning/refrigeration and automotive manufacturing. They are vital to equipment manufacturers and end-users in the complex fabrication of semiconductors and thin film coatings for optics, flat panel displays, solar cells and industrial vacuum coating applications. Other users of our vacuum-based processes include the life sciences, research, aerospace, packaging, heat treatment, laser cutting and many other industrial processes. We also leverage our expertise in vacuum technology to provide unique, toxic chemical analysis products for emergency response, security, and environmental health and safety.
Women in STEM careers at INFICON
INFICON was part of the annual Photonics Day in Collaboration with University of Applied Sciences Graubünden, Switzerland.
Analyzing Tool States and Idle Time to Identify Capacity Bottlenecks
Enhancing Tool Dispatching Efficiency
QCM use in the semiconductor industry for processes like ALD, E-beam, resistive source and sputtering.
Making a difference in the community
«Ad hoc announcement pursuant to Art. 53 LR»
Time flies when making history. Today, we celebrate 30 years of the groundbreaking Cold Cathode product line in vacuum measurement. But first, let's journey back to where it all started.
A Collaboration with the University of Rhode Island
Maximize Efficiency in full automated battery mass production
Comprehensive Training session on innovative leak detection solutions.
We are proud to offer a full line of A2L-tested and certified tools you can have confidence in.
How implementing an electronic leak detector can help
Revolutionizing leak testing in Refrigeration and Air Conditioning (RAC) systems with cutting-edge robotic technology.
INFICON is a leading provider of innovative instrumentation, critical sensor technologies, and Smart Manufacturing/Industry 4.0 software solutions that enhance productivity and quality of tools, processes, and complete factories. These analysis, measurement and control products are essential for gas leak detection in air conditioning/refrigeration and automotive manufacturing. They are vital to equipment manufacturers and end-users in the complex fabrication of semiconductors and thin film coatings for optics, flat panel displays, solar cells and industrial vacuum coating applications. Other users of our vacuum-based processes include the life sciences, research, aerospace, packaging, heat treatment, laser cutting and many other industrial processes. We also leverage our expertise in vacuum technology to provide unique, toxic chemical analysis products for emergency response, security, and environmental health and safety.
With an already leading position our future aspirations are high as we strongly believe there is significant further potential to expand our position and offering in the market especially with our strategic accounts by developing even closer relationships and contribute to their business success in a more strategic way.
HAPSITE CDT provides versatility for military, civilian and hazardous response teams to identify and quantify narcotics, Chemical Warfare Agents (CWA), Fourth Generation Agents (FGA), explosives and toxic industrial chemical threats on-site to develop critical health risk assessments, quickly. The new handheld cartridge-based sampling system allows users to carry lighter equipment, quickly deploy and get multiple samples analyzed onsite. This webinar reviews air sampling using the HAPSITE CDT.
Quartz crystal microbalance (QCM) technology has been used for decades to control deposition rate and thickness for the most complex processes seen in the ophthalmic, optical, display, and solar markets. INFICON has recently made a new advancement in QCM technology to address a problem seen across all of these industries related to QCM temperature effects. Thermal shock can cause QCM thickness errors which can decrease yield and increase manufacturing costs if temperature is not accounted for correctly.
Temperature impacts the frequency measurement and can create false mass readings. Thin film deposition controllers currently on the market have no good way of distinguishing frequency shifts related to mass from frequency shifts related to temperature, resulting in thickness errors and poor PID control. This can be detrimental to complex coating processes due to the low deposition rates and incredibly thin layers required. Thermal shocks can occur at any point in a deposition process and can cause unnecessary PID-loop corrections, triggering non-uniform deposition in respect to time. This means that the quality throughout the bulk of the material is inadequate. For very thin films, the thickness termination may not be at the real intended thickness because the process time window is small compared to the time allowed for a QCM to recover from a thermal shock event.
INFICON has patented a new temperature compensation technique for SC-cut crystals to remove the effects of temperature variation on the QCM without the need for additional hardware or custom and expensive sensors.
Please join us for the ‘Temperature Compensation for QCMs’ webinar, hosted by Sheldon Wayman, Product Engineer for INFICON Inc.
Prevent refrigerant losses through accurate leak detection
With IR Technology Across the Entire Measuring Range
Groundbreaking method for testing filled lithium-ion and sodium-ion battery cells with ELT3000 PLUS and ELT Vmax leak detectors, using a patented direct electrolyte leak testing technique.
New Euro 7 Standard passed by the European Parliament.
Reducing production cost thanks to the EcoBoost function for LDS3000 leak detector.
INFICON EDC expands its facility to bring the highest standards of quality assurance to advanced manufacturers worldwide.
INFICON is a leading provider of innovative instrumentation, critical sensor technologies, and Smart Manufacturing/Industry 4.0 software solutions that enhance productivity and quality of tools, processes, and complete factories. These analysis, measurement and control products are essential for gas leak detection in air conditioning/refrigeration and automotive manufacturing. They are vital to equipment manufacturers and end-users in the complex fabrication of semiconductors and thin film coatings for optics, flat panel displays, solar cells and industrial vacuum coating applications. Other users of our vacuum-based processes include the life sciences, research, aerospace, packaging, heat treatment, laser cutting and many other industrial processes. We also leverage our expertise in vacuum technology to provide unique, toxic chemical analysis products for emergency response, security, and environmental health and safety.
New Generation User Software
INFICON Technology Day
Us, as a leader in vacuum technology plays a crucial role in advancing semiconductor manufacturing, offering unparalleled precision that shapes the future of the electronics industry.
Redefining the Future of Leak Detection in Refrigeration and Air Conditioning
... or a Women's Journey in the Tech World.
In a world characterized by technological advancement and economic growth, women play a crucial role in the technology industry.
Nearly all semiconductor fabs hold a daily fab status meeting. This article explores, "What elements makeup an effective daily fab status meeting?"
INFICON is a leading provider of innovative instrumentation, critical sensor technologies, and Smart Manufacturing/Industry 4.0 software solutions that enhance productivity and quality of tools, processes, and complete factories. These analysis, measurement and control products are essential for gas leak detection in air conditioning/refrigeration and automotive manufacturing. They are vital to equipment manufacturers and end-users in the complex fabrication of semiconductors and thin film coatings for optics, flat panel displays, solar cells and industrial vacuum coating applications. Other users of our vacuum-based processes include the life sciences, research, aerospace, packaging, heat treatment, laser cutting and many other industrial processes. We also leverage our expertise in vacuum technology to provide unique, toxic chemical analysis products for emergency response, security, and environmental health and safety.
The intelligent helium spray-gun for all leak detectors of the UL Family
INFICON is a leading provider of innovative instrumentation, critical sensor technologies, and Smart Manufacturing/Industry 4.0 software solutions that enhance productivity and quality of tools, processes, and complete factories. These analysis, measurement and control products are essential for gas leak detection in air conditioning/refrigeration and automotive manufacturing. They are vital to equipment manufacturers and end-users in the complex fabrication of semiconductors and thin film coatings for optics, flat panel displays, solar cells and industrial vacuum coating applications. Other users of our vacuum-based processes include the life sciences, research, aerospace, packaging, heat treatment, laser cutting and many other industrial processes. We also leverage our expertise in vacuum technology to provide unique, toxic chemical analysis products for emergency response, security, and environmental health and safety.
Discover How the Latest IRwin Update Enhances Leak Survey
INFICON Experts from Around the World Showcase Our Newest Products in France
INFICON is a leading provider of innovative instrumentation, critical sensor technologies, and Smart Manufacturing/Industry 4.0 software solutions that enhance productivity and quality of tools, processes, and complete factories. These analysis, measurement and control products are essential for gas leak detection in air conditioning/refrigeration and automotive manufacturing. They are vital to equipment manufacturers and end-users in the complex fabrication of semiconductors and thin film coatings for optics, flat panel displays, solar cells and industrial vacuum coating applications. Other users of our vacuum-based processes include the life sciences, research, aerospace, packaging, heat treatment, laser cutting and many other industrial processes. We also leverage our expertise in vacuum technology to provide unique, toxic chemical analysis products for emergency response, security, and environmental health and safety.
$40 Million Federal Funding to Transform Upstate NY into the "Semiconductor Superhighway," Boosting Innovation and Workforce Development
Next level leak detection: Easy handling and faster results with our SMART add-ons for the UL Leak Detectors Series.
INFICON is a leading provider of innovative instrumentation, critical sensor technologies, and Smart Manufacturing/Industry 4.0 software solutions that enhance productivity and quality of tools, processes, and complete factories. These analysis, measurement and control products are essential for gas leak detection in air conditioning/refrigeration and automotive manufacturing. They are vital to equipment manufacturers and end-users in the complex fabrication of semiconductors and thin film coatings for optics, flat panel displays, solar cells and industrial vacuum coating applications. Other users of our vacuum-based processes include the life sciences, research, aerospace, packaging, heat treatment, laser cutting and many other industrial processes. We also leverage our expertise in vacuum technology to provide unique, toxic chemical analysis products for emergency response, security, and environmental health and safety.
Introducing EtherCAT and PROFINET Interfaces
INFICON is a leading provider of innovative instrumentation, critical sensor technologies, and Smart Manufacturing/Industry 4.0 software solutions that enhance productivity and quality of tools, processes, and complete factories. These capabilities are vital to semiconductor fabrication facilities, equipment manufacturers, and end-users. The Intelligent Manufacturing Systems (IMS) group designs, develops, deploys, and supports Smart Manufacturing applications, including integration with INFICON smart sensor technologies. IMS is comprised of FPS productivity, FabTime reporting, and FabGuard tool data collection and fault detection solutions.
INFICON is a leading provider of innovative instrumentation, critical sensor technologies, and Smart Manufacturing/Industry 4.0 software solutions that enhance productivity and quality of tools, processes, and complete factories. These analysis, measurement and control products are essential for gas leak detection in air conditioning/refrigeration and automotive manufacturing. They are vital to equipment manufacturers and end-users in the complex fabrication of semiconductors and thin film coatings for optics, flat panel displays, solar cells and industrial vacuum coating applications. Other users of our vacuum-based processes include the life sciences, research, aerospace, packaging, heat treatment, laser cutting and many other industrial processes. We also leverage our expertise in vacuum technology to provide unique, toxic chemical analysis products for emergency response, security, and environmental health and safety.
How to enhance customers' experience
INFICON is a leading provider of innovative instrumentation, critical sensor technologies, and Smart Manufacturing/Industry 4.0 software solutions that enhance productivity and quality of tools, processes, and complete factories. These analysis, measurement and control products are essential for gas leak detection in air conditioning/refrigeration and automotive manufacturing. They are vital to equipment manufacturers and end-users in the complex fabrication of semiconductors and thin film coatings for optics, flat panel displays, solar cells and industrial vacuum coating applications. Other users of our vacuum-based processes include the life sciences, research, aerospace, packaging, heat treatment, laser cutting and many other industrial processes. We also leverage our expertise in vacuum technology to provide unique, toxic chemical analysis products for emergency response, security, and environmental health and safety.
Total Pressure Measurement
Visualize, Monitor, and Control the Subfab
INFICON is a leading provider of innovative instrumentation, critical sensor technologies, and Smart Manufacturing/Industry 4.0 software solutions that enhance productivity and quality of tools, processes, and complete factories. These analysis, measurement and control products are essential for gas leak detection in air conditioning/refrigeration and automotive manufacturing. They are vital to equipment manufacturers and end-users in the complex fabrication of semiconductors and thin film coatings for optics, flat panel displays, solar cells and industrial vacuum coating applications. Other users of our vacuum-based processes include the life sciences, research, aerospace, packaging, heat treatment, laser cutting and many other industrial processes. We also leverage our expertise in vacuum technology to provide unique, toxic chemical analysis products for emergency response, security, and environmental health and safety.
Understand how Pirani technology works
«Ad hoc announcement pursuant to Art. 53 LR»
Integration of Advanced Sensing Systems
INFICON is a leading provider of innovative instrumentation, critical sensor technologies, and Smart Manufacturing/Industry 4.0 software solutions that enhance productivity and quality of tools, processes, and complete factories. These analysis, measurement and control products are essential for gas leak detection in air conditioning/refrigeration and automotive manufacturing. They are vital to equipment manufacturers and end-users in the complex fabrication of semiconductors and thin film coatings for optics, flat panel displays, solar cells and industrial vacuum coating applications. Other users of our vacuum-based processes include the life sciences, research, aerospace, packaging, heat treatment, laser cutting and many other industrial processes. We also leverage our expertise in vacuum technology to provide unique, toxic chemical analysis products for emergency response, security, and environmental health and safety.
Smart essentials for intelligent leak detection
INFICON is a leading provider of innovative instrumentation, critical sensor technologies, and Smart Manufacturing/Industry 4.0 software solutions that enhance productivity and quality of tools, processes, and complete factories. These analysis, measurement and control products are essential for gas leak detection in air conditioning/refrigeration and automotive manufacturing. They are vital to equipment manufacturers and end-users in the complex fabrication of semiconductors and thin film coatings for optics, flat panel displays, solar cells and industrial vacuum coating applications. Other users of our vacuum-based processes include the life sciences, research, aerospace, packaging, heat treatment, laser cutting and many other industrial processes. We also leverage our expertise in vacuum technology to provide unique, toxic chemical analysis products for emergency response, security, and environmental health and safety.
INFICON is a leading provider of innovative instrumentation, critical sensor technologies, and Smart Manufacturing/Industry 4.0 software solutions that enhance productivity and quality of tools, processes, and complete factories. These analysis, measurement and control products are essential for gas leak detection in air conditioning/refrigeration and automotive manufacturing. They are vital to equipment manufacturers and end-users in the complex fabrication of semiconductors and thin film coatings for optics, flat panel displays, solar cells and industrial vacuum coating applications. Other users of our vacuum-based processes include the life sciences, research, aerospace, packaging, heat treatment, laser cutting and many other industrial processes. We also leverage our expertise in vacuum technology to provide unique, toxic chemical analysis products for emergency response, security, and environmental health and safety.
INFICON is a leading provider of innovative instrumentation, critical sensor technologies, and Smart Manufacturing/Industry 4.0 software solutions that enhance productivity and quality of tools, processes, and complete factories. These analysis, measurement and control products are essential for gas leak detection in air conditioning/refrigeration and automotive manufacturing. They are vital to equipment manufacturers and end-users in the complex fabrication of semiconductors and thin film coatings for optics, flat panel displays, solar cells and industrial vacuum coating applications. Other users of our vacuum-based processes include the life sciences, research, aerospace, packaging, heat treatment, laser cutting and many other industrial processes. We also leverage our expertise in vacuum technology to provide unique, toxic chemical analysis products for emergency response, security, and environmental health and safety.
FabTime® provides a standardized system for factory personnel across diverse teams to efficiently monitor KPIs, identify opportunities for improvement, and quickly answer questions about factory operations.
INFICON is a leading provider of innovative instrumentation, critical sensor technologies, and Smart Manufacturing/Industry 4.0 software solutions that enhance productivity and quality of tools, processes, and complete factories. These analysis, measurement and control products are essential for gas leak detection in air conditioning/refrigeration and automotive manufacturing. They are vital to equipment manufacturers and end-users in the complex fabrication of semiconductors and thin film coatings for optics, flat panel displays, solar cells and industrial vacuum coating applications. Other users of our vacuum-based processes include the life sciences, research, aerospace, packaging, heat treatment, laser cutting and many other industrial processes. We also leverage our expertise in vacuum technology to provide unique, toxic chemical analysis products for emergency response, security, and environmental health and safety.
Sensistor® Sentrac® and BM1000 module
Understanding the I-Guide Feature in Sensistor® Sentrac® Hydrogen Leak Detector
INFICON is a leading provider of innovative instrumentation, critical sensor technologies, and Smart Manufacturing/Industry 4.0 software solutions that enhance productivity and quality of tools, processes, and complete factories. These analysis, measurement and control products are essential for gas leak detection in air conditioning/refrigeration and automotive manufacturing. They are vital to equipment manufacturers and end-users in the complex fabrication of semiconductors and thin film coatings for optics, flat panel displays, solar cells and industrial vacuum coating applications. Other users of our vacuum-based processes include the life sciences, research, aerospace, packaging, heat treatment, laser cutting and many other industrial processes. We also leverage our expertise in vacuum technology to provide unique, toxic chemical analysis products for emergency response, security, and environmental health and safety.