Helium
Reset the filters to get results.
![951-Protec-P3000-XL 951-Protec-P3000-XL](/uploads/media/323x215/01/951-Protec-P3000-XL.png?v=1-0)
Specifically designed for full-time sniffing applications in demanding production Environments.
- I-Guide operator guiding mode ensures your operator is testing the right locations with the correct technique.
- Improved system design compensates for operator error reducing the potential for missed leaks.
- Multiple alarm functions make sure alarms can not be overlooked.
- Built-in PRO-Check reference leak allows for easy and fast calibration at the production line at any time.
![922-XL3000flex 922-XL3000flex](/uploads/media/323x215/02/922-XL3000flex.png?v=1-0)
HIGH FLOW technology for highest measurement certainty and fastest throughput.
- INFICON High Flow Technology
- Enables unmatched measurement certainty - stop missing leaks!
- Finds leaks even in hard to access areas
- Helps unexperienced operators to reliably locate leaks
![931-UL6000-Fab-PLUS 931-UL6000-Fab-PLUS](/uploads/media/323x215/01/931-UL6000-Fab-PLUS.png?v=1-0)
The ultimate in mobile vacuum leak detection designed to meet the most critical and demanding leak detection applications and in particular large volumes
- Fastest mobile vacuuum leak detector
- Most reliable leak detection
- Most robust vacuum system
- Slim & easy to manouver
- Intuitive control & Easy to use
![916-UL3000-Fab-ULTRA 916-UL3000-Fab-ULTRA](/uploads/media/323x215/06/916-UL3000-Fab-ULTRA.png?v=1-0)
Designed for the needs of leak checking in semiconductor applications
- Save time with I·CAL software algorithm for fast measurements in the range of 10-9 to 10-12 mbar·l/s
- Most efficient leak checking using I·ZERO 2.0
- Applicable for vacuum and sniffer leak search
- Minimize leak checking efforts through quick evacuation and response time
![937-UL1000-Fab 937-UL1000-Fab](/uploads/media/323x215/07/937-UL1000-Fab.png?v=1-0)
renowned standard when it comes to economic helium vacuum leak testing in industrial or semiconductor environments
- minimize leak testing efforts through quick pump down and response time
- avoid need for multiple leak tests by using selectable background suppression (iZERO)
- enable easy access to maintenance areas with restricted space through maneuverable design
- low total cost of ownership (TCO) enabled by robust two hot filament ion source (3 years warranty) and counterflow vacuum system
![935-UL1000 935-UL1000](/uploads/media/323x215/05/935-UL1000.png?v=1-0)
Providing fast, accurate and repeatable test results, testing flexibility, and high sensitivity in a low maintenance design
- Wide measurement range over 15 decades
- Short pumpdown and response time
- Mobile all-metal housing for added convenience with uncompromised maneuverability
- I-CAL (Intelligent Calculation Algorithm for Leak rates)to ensure fastest response time to leaks in all measurement ranges
![949-LDS3000 949-LDS3000](/uploads/media/323x215/09/949-LDS3000.png?v=1-0)
Modular leak detector, compact Performance at the Highest Level
- More Compact And Easier To Integrate
- Communicative Diversity
- High Reliability
![947-Modul1000 947-Modul1000](/uploads/media/323x215/07/947-Modul1000.png?v=1-0)
Reliable, intelligent and repeatable platform, Optimize your production
- Reliable for maximum uptime
- Intelligent Design improves measurement certainty
- Easy setting of automated procedures
![914-TGuard2 914-TGuard2](/uploads/media/323x215/04/914-TGuard2.png?v=1-0)
T-Guard2 Leak Detection Sensor closes the gap between costly hard vacuum helium leak detection and low sensitivity leak testing methods like waterbath and pressure decay.
- Low operating cost
- No limitation of product properties
- Find all leaks reliably
- Easy to use
![939-LDS3000-AQ 939-LDS3000-AQ](/uploads/media/323x215/09/939-LDS3000-AQ.png?v=1-0)
Cost efficient forming gas or helium for accumulation leak testing, very sensitive and can detect leaks down to the 10-5 mbar∙l/s range
- Cost efficient solution to leak test parts
- Testing as reliable as vacuum chamber - at nearly the cost of air testing
- Ready for the future with fieldbus interfaces for the Industry 4.0 integration
- Temperature and humidty indipendency offers reliable test results with high repeteability
![10482-3D_Roboter_Leak_Detection 10482-3D_Roboter_Leak_Detection](/uploads/media/323x215/02/10482-3D_Roboter_Leak_Detection.png?v=3-0)
I-Guide3D 350 Scanner: Maximum Precision for Fully Automated Leak Test Systems
- Automize manual sniffing process regardless variances of joints
- For all tube sizes starting from 1,5mm
- Robot path planning done by software to optimize cycle time
- Become less dependant from workers