인피콘 아카데미
지금 다음 웹세미나/세미나를 등록하거나 귀하에게 필요한 콘텐츠로 구성한 교육 과정을 예약하십시오.
곧 만나 뵙기를 기대하겠습니다!
모든 제안
Smart essentials for intelligent leak detection
Quartz crystal microbalance (QCM) technology has been used for decades to control deposition rate and thickness for the most complex processes seen in the ophthalmic, optical, display, and solar markets. INFICON has recently made a new advancement in QCM technology to address a problem seen across all of these industries related to QCM temperature effects. Thermal shock can cause QCM thickness errors which can decrease yield and increase manufacturing costs if temperature is not accounted for correctly.
Temperature impacts the frequency measurement and can create false mass readings. Thin film deposition controllers currently on the market have no good way of distinguishing frequency shifts related to mass from frequency shifts related to temperature, resulting in thickness errors and poor PID control. This can be detrimental to complex coating processes due to the low deposition rates and incredibly thin layers required. Thermal shocks can occur at any point in a deposition process and can cause unnecessary PID-loop corrections, triggering non-uniform deposition in respect to time. This means that the quality throughout the bulk of the material is inadequate. For very thin films, the thickness termination may not be at the real intended thickness because the process time window is small compared to the time allowed for a QCM to recover from a thermal shock event.
INFICON has patented a new temperature compensation technique for SC-cut crystals to remove the effects of temperature variation on the QCM without the need for additional hardware or custom and expensive sensors.
Please join us for the ‘Temperature Compensation for QCMs’ webinar, hosted by Sheldon Wayman, Product Engineer for INFICON Inc.
HAPSITE CDT provides versatility for military, civilian and hazardous response teams to identify and quantify narcotics, Chemical Warfare Agents (CWA), Fourth Generation Agents (FGA), explosives and toxic industrial chemical threats on-site to develop critical health risk assessments, quickly. The new handheld cartridge-based sampling system allows users to carry lighter equipment, quickly deploy and get multiple samples analyzed onsite. This webinar reviews air sampling using the HAPSITE CDT.
NFICON의 He Leak Detector를 이용하면 공정 설비의 유지 보수 필요성이 줄어듦과 동시에 더욱 안전한 환경에서 작업할 수 있습니다.
인피콘은 HVAC/R 서비스 및 수리를 위해 신뢰할 수 있는 정확하고 신뢰할 수 있는 서비스 툴을 제공합니다.
Fabguard Explorer 는 Residual Gas Analyzer를 조작하기 위한 효율적인 프로그램 입니다.
Fabguard IPM (integrated process monitor) 는 Residual Gas Analyzer 를 조작하기 위한 강력한 프로그램 입니다.
당사에서는 반도체/디스플레이 산업에서 박막 증착 공정에 균일성, 수율, 반복성 및 처리량을 향상하기 위한 필수적인 QCM(Quartz Crystal Microbalance)
INFICON 아카데미
The INFICON 아카데미 에서는 혁신적 측정 기술, 핵심 기술에 대한 센서 기술과 오늘날의 스마트 제조/Industry 4.0 소프트웨어에 대한 지식을 배울 수 있습니다.